Technical Questions Regarding WYT-19 Diamante Pro Series Wall-Mounted Equipment
* If you are looking for the instructions for the WYT 19-SEER series, please click here:Connecting a Diamante Pro WYT-19 to Pioneer Airlink. Make sure you are connected to a 2.4GHZ internet Wi-Fi with no VPNs active. We recommend the Pioneer Airlink
Step 1: Power on the remote controller. Step 2: Press "FAN", "MODE", and the "UP-DOWN SWING” together at the same time for 5 seconds. The remote controller will enter the parameter inquiry function, and display "00". Step 3: Change this value by pres
There may be times where the outside unit builds up frost and needs to be manually defrosted. To do so, first place the unit in heating mode using the remote control. Next, locate and press the ECO button 10 times within 8 seconds. The indoor unit wi
Regarding the Diamante series, most remotes have the heat setting controlled by the switches near the batteries.To activate the heat mode option, check that the setting is set to HEAT using the diagram below.If it isn't, then please set it to HEAT an
Please click the above link to download the PDF instructions on disassembling your indoor unit.
Please click the above link to download the PDF instructions on disassembling your outdoor unit.