Wrap the Lines & Seal the Air Gaps for Ducted Ceiling Concealed Indoor UnitsUpdated 11 days ago

Introduction

This article explains how to wrap the lines and seal the air gaps for ducted ceiling concealed indoor units. 

Even small gaps can result in air or water leakage, or cause condensation to form. 

This article is for the following system: 

Quantum Ultra Ducted Ceiling Concealed (RYT-24)

Steps

1. Arrange the pipes, cables, and drain hose correctly. 
2. Lag the pipe joints with insulation material and secure them with vinyl tape. 
3. Run the bound bundle through the wall hole, ensuring not to kink the drainpipe when binding. 
4. Ensure that all the connections between the panel and ceiling, as well as between the panel and indoor unit are properly sealed.