Activate Night ModeUpdated 4 days ago

Introduction

This article explains how to activate Night mode for Under-Bench RV Inverter Packaged Heat Pump Air Conditioners (PYR). 

This mode is generally meant for periods of lower comfort requirements, such as during typical sleeping hours. Selecting this mode results in decreased energy use.

The system automatically keeps the fan speed to low when using this mode, so the fan speed selection buttons are disabled. 

The mode can only be activated via the remote control.

The selected configuration will be retained in the system's memory when it is switched on again next. 

Steps

1. Press the On/Off button to switch the machine on or off. 
2. Press the Mode button to cycle through the operating modes, then select Night mode. 
3. Press the Sleep button to turn this feature on or off. 
4. Use the temperature selection buttons to select a set point temperature between 64-86°F.