E2 Error CodeUpdated 4 days ago

Introduction

The "E2" error code indicates a T1 indoor unit sensor failure. This article is for Vertex Ducted Central Split (DYC-18) systems. 

The error code shows on the wired controller display. 

Cause: Sensor reading error. 

Troubleshooting Diagram

Troubleshooting Notes

• Confirm whether the sensor is firmly connected and check the sensor connector to ensure that it is firmly connected. 
• Unplug the sensor and use a multimeter to measure the resistance to check whether it is an open circuit or short circuit. If so, replace the sensor. If not, replace the main control board.