Support Center logo
Support Center logo

All articles

Connecting a Diamante Pro WYT-19 to Pioneer AirlinkUpdated 9 months ago


WYT-22 PRO Wi-Fi Pair Guide


* If you are looking for the instructions for the WYT 19-SEER series, please click here:
Connecting a Diamante Pro WYT-19 to Pioneer Airlink


 Make sure you are connected to a 2.4GHZ internet Wi-Fi with no VPNs active.

Downloading the App

We recommend the Pioneer Airlink app, however, you can also utilize SmartLife-SmartHome. 

Apple: 

Android:


Purchasing the Wi-Fi Module

WYT-19 Diamante Pro:


Installing the Wi-Fi Module

Figure 1 (WYT-19 Diamante Pro Module Installed)


Pairing the Unit to the Smartphone App

First you must download the app from the store and enter the setup phase in the app where it asks you to reset the system. 

Once you have done so, please do the following: 

  1. Turn off the unit using the remote control. 
  2. Turn the circuit breaker that is powering the outside unit off for 10 seconds, then turn it back on. 
  3. Turn on the unit using the remote control. 
  4. Press the “DISPLAY” button on the remote control 6 times in a row within 6 seconds.
  5. The indoor unit will flash “AP” or “CF” on the LED display.
  6. Hold the small black button until the light is flashing. 
    • You can SKIP/CONTINUE if the app asks for a reset button to be pushed.
  7. The unit will be paired, and you can repeat these steps for any other units. 
Was this article helpful?
Yes
No