The Pioneer Flare Connection Leak Guard Sealer is a gasket and thread sealant used for HVAC/R systems.

<h2 id="isPasted">Introduction</h2>The <a href="https://www.pioneerminisplit.com/products/pioneer-flare-connection-leak-guard-sealer-2cc-tube-prevents-flare-connection-leaks?srsltid=AfmBOoqz_LmNUJX8nXmWuTeEYqV1il3ieHup5qtMN2agqbuGZZBBGMbp" target="_blank" rel="noopener noreferrer">Pioneer Flare Connection Leak Guard Sealer</a> is a gasket and thread sealant used for HVAC/R systems. The leak guard is commonly applied to flare fittings to ensure a tight, leak-free seal.<img src="https://attachments.gorgias.help/Q9r0k7BYaV2vg13y/hc/9JWjXVxG8m6DvMqm/2025053014-704c4e90-77fc-434c-969a-aab3e8bb707c-pioneer_leak_guard.png" style="width: 350px;" class="fr-fic fr-dib">Pioneer Leak Guard packetNote: The leak guard is not a replacement for properly flaring and tightening a connection. We recommend using the leak guard as a supplement.<h2 id="steps">Steps</h2>Follow these steps to safely and effectively apply the leak guard to flare mating surfaces:Note: We recommend wearing gloves and safety glasses when working with HVAC/R systems and using sealants.<ol><li style="font-size: 16px;">Clean the Surfaces: Clean both mating surfaces thoroughly before applying the leak guard. Use a cloth to remove any dirt or oil. Ensure the surfaces are completely clean by using a mild solvent. Cleaning the surfaces helps the leak guard bond effectively.</li><li style="font-size: 16px;">Apply the Leak Guard: Use a small brush or the tip of your finger to apply the leak guard evenly on the mating surfaces. Applying a large amount is not necessary. Use enough to thinly coat the flare&#x2019;s mating surfaces. Create a thin film over the entire surface.<img src="https://attachments.gorgias.help/Q9r0k7BYaV2vg13y/hc/9JWjXVxG8m6DvMqm/2025053014-a6bba8b5-9617-4041-a01f-b92a5155c54a-pioneer_leak_guard_apply.png" style="width: 400px;" class="fr-fic fr-dib"></li><li style="font-size: 16px;">Connect the Surfaces: After applying the leak guard, connect the flare fitting properly.</li><li style="font-size: 16px;">Tighten the Fitting: Tighten the flare fitting after connecting it. Note: Do not over-tighten the fitting to avoid stripping the threads or cracking the flare.</li><li>Wipe Off Excess Leak Guard: Remove any excess leak guard after tightening the fitting. &#xA0;&#xA0;</li></ol>Note: Refer to the manufacturer&#x2019;s instructions when working with the leak guard and fittings.

Apply Pioneer Flare Leak Guard during Installation

This article explains why a fine mist is coming from the air outlet of the system.

<h2 id="introduction">Introduction</h2>This article explains why a fine mist is coming from the air outlet of the system.&#xA0;<h2 id="possible-cause">Possible Cause</h2>This occurs when the air in the room becomes considerably cold. For example in &quot;Cooling&quot; or &quot;Dehumidification / Dry&quot; modes.&#xA0;

Figure Out Why a Fine Mist is Coming from the Air Outlet

We recommend two options for fixing micro-leaks that are difficult to trace.

<div data-block="true" data-editor="51ap4" data-offset-key="8s0j2-0-0">We recommend two options for fixing micro-leaks that are difficult to trace. &#xA0;<ol><li style="font-size: 16px;">Employ our <a href="https://www.pioneerminisplit.com/collections/accesories/products/refrigerant-stop-leak-sealer-syringe-to-repair-minor-leaks-on-air-conditioners-and-heat-pumps" target="_blank" rel="noopener noreferrer">Refrigerant Stop Leak Sealer Syringe</a>. The Leak-Stop Injection Agent plugs most small leaks.</li><li style="font-size: 16px;">Use our <a href="https://www.pioneerminisplit.com/collections/accesories/products/quick-recharge-r410a-refrigerant-bottle-for-hvac-systems-with-leak-stop-and-uv-dye-additive-1-8lb" target="_blank" rel="noopener noreferrer">Quick-Recharge R410a Refrigerant Bottle for HVAC Systems with Leak-Stop and UV-Dye Additive</a>. The newly formulated R410a recharge bottle traces and stops leaks while also refilling the charge of the unit.</li></ol>If the leaks are too small, it&#x2019;s more cost and time-effective to plug the leak with a catch-all formula.Note: Both recommended options will not damage the refrigerant circuit.</div><div data-block="true" data-editor="51ap4" data-offset-key="66ttc-0-0"> </div>

Fix Leaks that are Difficult to Trace

This article provides solutions for indoor units leaking water.

<h2 id="introduction">Introduction</h2>This article provides solutions for indoor units leaking water.&#xA0;<h2 id="solutions">Solutions</h2><ul><li>Verify that the indoor unit is both horizontally and vertically leveled.&#xA0;</li><li>Confirm that the drain tube is at a continuous downward pitch.<ul><li>Pour a cup of water over the indoor unit&apos;s coils so that it reaches the drain pipe.&#xA0;</li><li>Verify that the water drains out of the tube freely. If it doesn&apos;t, find the cause and correct it.&#xA0;</li></ul></li></ul>

Solutions for Indoor Units Leaking Water

There are only a few reasons as to why a Pioneer wall-mounted indoor unit could be leaking water.

There are only a few reasons why a Pioneer wall-mounted indoor unit could be leaking water. The most common reason is the drain tube is cracked, clogged, or not at a continuous downward pitch. The drain tube is an insulated tube on the rear side of the indoor unit.&#xA0;<img src="https://attachments.gorgias.help/Q9r0k7BYaV2vg13y/hc/9JWjXVxG8m6DvMqm/2025053014-578daa63-dd15-4aed-b5e6-8f3bd9ac674e-drain_tube_diagram.png" style="width: 300px;" class="fr-fic fr-dib">Check the state of the drain hose, as well as any attached extensions. Conduct a drainage test to ensure the hose can drain freely. You can conduct a drainage test by opening the front panel, removing any filters, and pouring water over the coils. Check whether the water is properly exiting from the point of drain.<img src="https://attachments.gorgias.help/Q9r0k7BYaV2vg13y/hc/9JWjXVxG8m6DvMqm/2025053014-5ca659f4-d0c1-417f-9ffc-63b2f1254817-drainage_test.png" style="width: 400px;" class="fr-fic fr-dib">Another set of possible causes:<ul><li style="font-size: 16px;">The indoor unit is not level.&#xA0;</li><li style="font-size: 16px;">The drain pan is cracked or damaged.&#xA0;</li><li style="font-size: 16px;">There is a back-flow of condensate water into the system&apos;s drain pan.&#xA0;</li><li style="font-size: 16px;">The drain outlet port is exposed (most models have drain ports on both sides, where the unused one stays plugged by a stopper).&#xA0;</li><li style="font-size: 16px;">If the drain pain is filled with debris or dust and preventing water from draining, you can pour a 50/50 mixture of water and white vinegar into the drain pan to unblock it. You can also use specialized cleaner tablets.</li></ul>If your unit passes the drainage test but drips water from time to time, then your issue is not plumbing/drain related but can likely be attributing to either:<ul><li style="font-size: 16px;">If water drips from the front louver where air blows out:&#xA0;Make sure the air flaps or louvers are not in a closed position, causing the airflow to be cut. This will lead to a buildup of condensation and dripping. Manipulate the air flaps and louvers to ensure the removal of airflow restrictions.</li><li style="font-size: 16px;">If water drips as a result of excessive ice/frost forming on the coils:&#xA0;The system is potentially low on refrigerant. This causes a buildup of icing and frost on the coils to the point where you can see ice completely blocking your view of the coil. This ice then melts and leads to water dripping off of the unit, which is ultimately a symptom of a bigger problem at hand. Check the operating pressure of the system and recharge to spec. if needed.</li></ul>On top of all these possible causes, it is always best practice to ensure that your filters, coil, and blower wheel are clean and clear. Otherwise, it can limit the performance of the equipment and potentially lead to unintended consequences, such as water dripping or leakage.

Understand Why Your Wall-Mounted Indoor Unit is Leaking Water Improperly

Chat with one of our friendly reps to get help quick.

Something on your mind not found here? E-mail us.

We offer phone support if you don't want to type.

Support Center

Water Leaks

Troubleshooting

By Symptom

Pioneer Offers Hyper-Heat Units

Pioneer Systems Offer Both Heating and Cooling Functions

Understand the Difference Between 115V and 230V Systems

Understand the Refrigerants Used for Each Model

How to Choose a System

Mini Splits are Capable of Using Fewer Indoor Units than the Outdoor Unit’s Zonal Capacity

Pioneer Mini Splits Function as Dehumidifiers

Pioneer Offers Different Lineset Lengths

Pioneer Offers Pre-Charged Linesets

Pioneer Offers Pre-Flared Linesets

Pioneer Systems Include Factory Pre-Charged Refrigerant

Single-Zone Mini Splits Cannot be Used with Multiple Indoor Units

Understand the Life Expectancy of Pioneer Systems

Mini-Split Basics

Determine the Unit Size Needed for Your Space

Match the Lineset Diameter to Your Pioneer Indoor Unit

Understand Why Short Cycling Occurs When Sizing Systems

Sizing & Efficiency Guide

Start Here

Understand the Differences Between Inverter+ and Inverter++ Systems

Understand the Differences Between the Wall-Mounted Ductless Mini Splits

Understand Which Units are Rated Energy-Star

Compare Models

Learn About the Discounts Available

Learn About the Energy-Star Tax Credits Available for Pioneer Systems

Learn More about IRA Tax Credits

Learn Why Your Pioneer Discount Code Only Says "SAMPLE"

Redeem Your Pioneer Rewards Points When Shopping Online

Understand How to Manage Multiple Credit Card Charges with Pioneer

Financing & Payment

Learn About Our Shipping and Delivery Details

Understand the Qualifications for Free Shipping

Order Status & Shipping

Diamante Essenza (WYT-17) Overview

Diamante Pro (WYT-20) Overview

Quantum Ultra High-Wall (WYT-24) Overview

Quantum Hyperformance (WYT-25) Overview

Quantum Fresh (WYT-FA) Overview

Quantum Ultra Ceiling Cassette (CYT-24) Overview

Quantum Ultra Ducted Ceiling Concealed (RYT-24) Overview

Quantum Ultra Floor-Ceiling Flex (UYT-24) Overview

Vertex Ducted Central Split (DYC-18) Overview

Quantum Ultra - Multi-Zone Overview

Product Line Overviews

Find Out How to Complete Returns

Figure Out How to Start Your Return

Learn About Our Return Policy

Learn About Our Policy for Undeliverable or Refused Shipments

Understand How to Return an Item

Understand the Eligibility Requirements for Refunds

Understand Our Return Fees

Understand Our Return Process

Returns & Refunds

Shopping & Pre-Purchase

Open Ceiling and Install Hanging Hook for Quantum Ultra Ceiling Cassette (CYT-24) Systems

Select the Indoor Unit Installation Location for Quantum Ultra Ceiling Cassette (CYT-24) Systems

Set Up the Indoor Unit Condensate Piping Connections for Quantum Ultra Ceiling Cassette (CYT-24) systems

Suspend the Air Handler Unit for Quantum Ultra Ceiling Cassette (CYT-24) Systems

Understand the Additional Leakage Sensor for Quantum Ultra Ceiling Cassette (CYT-24) Systems

Understand the Air Duct Parameters for Auxiliary Duct Usage

Cassette Units

Select the Indoor Unit Installation Location for Quantum Ultra Ducted Ceiling Concealed Systems

Select the Indoor Unit Installation Location for Vertex Ducted Central Split Systems

Understand the Additional Leakage Sensor for Quantum Ultra Ducted Ceiling Concealed (RYT-24) Systems

Ducted Units

Find an Installer for Your System

Find Professionals to Install Your Pioneer System

Learn Who is Permitted to Install Your System

Understand if Our Systems can be Self-Installed

Understand the Cost and Time Spent on Installing Systems

First-Time Setup

Angle Linesets Upward

Complete the Safety Checks and Test Run

Connect the Drain Hose for LCAC Systems

Find Out if a Wall-Mounted Indoor Unit can be Set onto Ceilings

Find Out if the Indoor Unit Requires Anything Extra in Order to be Wall-Mounted

Find Out the Ideal Height for Mounting Indoor Units

Learn the Gauge of Wire Used for Ductless System Connections

Setup the Lineset to Exit from the Side of the Indoor Unit

Understand 6-Foot Plastic Whips and 4-Lead Mini Split Connection Wire

Understand the Drilling Details to Accommodate Drain and Refrigerant Lines

Understand the Requirements for Installing Your System

Understand the Torque Wrench Size for Installing Your System

Installation Requirements

Understand the Meaning of “Multi-Zone”

Multi-Zone Units

Air Evacuation and Bleeding the Circuit for Wall-Mounted Systems

Connect the Drain Hose for Wall-Mounted Systems

Connect the Fresh Air Pipe for Quantum Fresh Systems

Connect the Power/Signal Electrical Wiring for Wall-Mounted Systems

Connect the Refrigerant Piping to the Indoor Unit for Wall-Mounted Systems

Connect the Refrigerant Piping to the Outdoor Unit for Wall-Mounted Systems

Drill the Piping Wall Hole for Wall-Mounted Systems

Install the Indoor Unit Mounting Plate for Wall-Mounted Units

Mount the Indoor Unit for Wall-Mounted Systems

Mount the Outdoor Unit for Wall-Mounted Systems

Prepare the Refrigerant Piping of the Indoor Unit for Wall-Mounted Systems

Select the Indoor Unit Installation Location for Quantum Fresh Systems

Select the Indoor Unit Installation Location for Quantum Ultra Floor-Ceiling Flex Systems

Select the Indoor Unit Installation Location for Wall-Mounted Systems

Select the Outdoor Unit Installation Location for Wall-Mounted Systems

Set Up the Outdoor Unit Condensate Water Drainage for Wall-Mounted Systems

Understand the Additional Leakage Sensor for Wall-Mounted Systems

Understand the Additional Leakage Sensor for Quantum Ultra Floor-Ceiling Flex (UYT-24) Systems

Single-Zone Units

Installation & Setup

Front Panel Displays for Quantum Ultra Ceiling Cassette Systems

Front Panel Display for Quantum Ultra Floor-Ceiling Flex Systems

Front Panel Displays for Wall-Mounted Systems

Wired Display Board Layout for Quantum Ultra Ducted Ceiling Concealed Systems

Display Layouts

CL error code

Clean the Anti-Dust Filters for Diamante Essenza and Pro Systems

Clean the Anti-Dust Filters for Quantum Ultra High Wall-Mount and Hyperformance Systems

Clean the Anti-Dust Filters for Quantum Fresh Systems

Cleaning the Anti-Dust Filters for Quantum Ultra Ceiling Cassette Systems

Clean the Anti-Dust Filters for Quantum Ultra Ducted Ceiling Concealed Systems

Clean the Anti-Dust Filters for Quantum Ultra Floor-Ceiling Flex Systems

Filter Cleaning & CL Code

Determine the Breaker Size and Wire Needed for Your System

Diagnose and Prevent Crossed Wiring in Multi-Zone Systems

Understand How the System Receives Power

Understand if Restarting Your Unit Manually is Required After the Power Goes Out

Electrical Related Queries

Locate the Model or Serial Number for Your System

Turn Off the LED Display for the Indoor Unit

General Queries

Check the Resistance of a Pioneer Temperature Sensor

Find Out the Type of Oil Used for Our Units

Fix Your Indoor Air Handler When the Unit is Not Turning On

Understand How Cased A-Coils Interact with Furnaces and Other Heating Units

Understand if the System's Fan Shuts Off in Cooling Mode

HVAC Related Queries

Maintenance Tips

Activate Auto Mode

Activate the Child-Lock Function

Activate Cooling Mode

Activate Dry Mode

Activate Energy Saver (ECO) Mode

Activate Fan-Only Mode

Activate the Fresh Air Feature

Activate Gentle Wind Mode

Activate Heating Mode

Activate the I Feel feature

Activate the Memory Feature

Activate Mute Mode

Activate the Self-Clean Feature

Activate Sleep Mode

Activate the Timer On/Timer Off Function

Activate Turbo Mode

Activate 46°F Freeze Protection

Understand the Auto-Restart Feature

Understand the Voice Control Feature

Modes Explained

Turn the LED Display On or Off

Control the Airflow for Ceiling Cassette Systems

Control the Airflow for Ducted Ceiling Concealed Systems

Control the Airflow for Floor-Ceiling Flex Systems

Control the Airflow for High Wall-Mounted Systems

Control System Airflow

Operating Instructions

Activate Heat Mode Using Diamante Pro Series Remotes

Replace Batteries for Remote Controls

Use the Emergency Manual Button to Operate the Indoor Unit Without a Remote Control