Wrap the Lines & Mount the Indoor Unit for Wall-Mounted SystemsUpdated 2 days ago

Introduction

This article explains how to wrap the lines and mount the indoor unit for wall-mounted systems. This is the final step in the installation process for all wall-mounted indoor units. 

This article is for the following systems: 

• Diamante Essenza High-Wall (WYT-17)
• Diamante Pro High-Wall (WYT-20)
• Quantum Ultra High-Wall (WYT-24)
• Quantum Hyperformance High-Wall (WYT-25)
• Quantum Fresh High-Wall (WYT-FA)

Steps 

1. Arrange the pipes, cables, and drain hose correctly. 
2. Lag the pipe joints with insulation material and secure them with vinyl tape. 
3. Run the bound bundle through the wall hole and mount the indoor unit securely onto the mounting plate. Press/push the lower part of the indoor unit, so it clicks onto the mounting plate.