Install the Mounting Plate for Wall-Mounted Indoor UnitsUpdated 4 days ago

Introduction

This article explains how to install the mounting plate for wall-mounted indoor units. This is the first step in the installation process for all wall-mounted indoor units. 

The actual appearance of the mounting plate may differ slightly, but the process is similar. 

This article is for the following systems: 

• Diamante Essenza High-Wall (WYT-17)
• Diamante Pro High-Wall (WYT-20)
• Quantum Ultra High-Wall (WYT-24)
• Quantum Hyperformance High-Wall (WYT-25)
• Quantum Fresh High-Wall (WYT-FA)

Steps

1. Dislodge the mounting plate from the rear of the indoor unit and place the mounting plate against the wall where the system will hang. Use a level to ensure that the plate is horizontally and vertically level. 
2. Drill 1-1/4 inch (32 mm) deep holes for each screw to enter. The locations are flexible but should be spaced well. 
3. Insert the plastic anchors into each of the holes. 
4. Fix the mounting plate to the wall by using the included tapping screws. Check that it is secured.