Wrap the Lines & Seal the Air Gaps for Floor-Ceiling Flex Indoor UnitsUpdated 11 days ago

Introduction

This article explains how to wrap the lines and seal the air gaps for floor-ceiling flex indoor units. This is the final step in the installation process for floor-ceiling flex indoor units. 

This article is for the following system: 

Quantum Ultra Floor-Ceiling Flex (UYT-24)

Steps

1. Arrange the pipes, cables, and drain hose correctly. 
2. Lag the pipe joints with insulation material and secure them with vinyl tape. 
3. Run the bound bundle through the wall hole, ensuring not to kink the drainpipe when binding. 
4. Ensure that all the connections between the panel and ceiling, as well as between the panel and indoor unit are properly sealed. Even small gaps can result in air or water leakage, or cause condensation to form.