Support Center logo
Support Center logo

All articles

Understand the Front Panel Display for Universal Floor-Ceiling Flex SystemsUpdated a day ago

Introduction

This article explains the front panel display layout for Quantum Ultra Universal Floor-Ceiling Flex (UYT-24) systems. 

Front Panel Display Layout

No.
LED IconSymbolDescription
1Signal ReceptorReceives signals from the handheld remote control
2Digital DisplayDisplay temperature settings, error codes, and operational status
3Defrost IndicatorIndicates that the unit is either in defrost mode or preheating
4Operation LightIndicates that the system is operating normally
5Alert IndicatorIlluminates to indicate a system fault or abnormal condition
6Timer IndicatorShows that a timer function has been activated
7Tone EmitterEmits confirmation tones when receiving command signals
8Manual ButtonManually powers the unit on or off without using the remote control


Notes

  • The shape and positions of the switches and indicators may vary according to the model, however the functions remain the same. There may be variances between the amount of digits that are shown on the remote control versus the amount on the indoor unit. 
  • Do not obstruct the front panel, otherwise it may not be able to receive infrared commands from the remote control. Ensure that the panel is not covered with paint or an adhesive layer. Keep all signal-emitting devices away. 
Was this article helpful?