IDU Disassembly for Quantum Ultra - Floor-Ceiling FlexUpdated 2 hours ago

Introduction

This article provides steps for disassembling the indoor unit of the Quantum Ultra - Floor-Ceiling Flex (UYT-24) system. 

Indoor Unit Disassembly

Before disassembly:

1. Remove the front grille. 

A. Remove the screws by pushing the buckles in the directions shown in the photo. 

B. Open the grille. 

C. Remove the grille from the back snap hook. 

2. Dismantle the left and right side plate. 

A. Unfix the screws as shown in the photo. 

B. Remove the left and right side blocks from the snap hooks. 

3. Remove the electronic control box assembly. 

A. Unfix the screws as shown in the photo. 

B. Remove the electronic control cover plate. 

4. Remove the front panel assembly. 

A. Unfix the screws on the front panel as shown in the photo. 

B. Remove the panel assembly. 

5. Remove the water tray. 

6. Remove the evaporator assembly. 

7. Remove the display panel and vane assembly. 

8. Remove the volute parts. 

9. Remove the centrifugal fan. 

10. Remove the fan motor.