Activate Fan-Only ModeUpdated an hour ago

Introduction

This article explains how to put a system into Fan-Only mode. 

Fan-Only mode sets the system to use only air ventilation and no heating or cooling. 

This article is for the following units: 

• Diamante Essenza (WYT-17)
• Diamante Pro (WYT-20)
• Quantum Ultra High-Wall (WYT-24)
• Quantum Hyperformance (WYT-25)
• Quantum Fresh (WYT-FA)
• Quantum Ultra Ceiling Cassette (CYT-24)
• Quantum Ultra Floor-Ceiling Flex (UYT-24)
• Quantum Ultra Ducted Ceiling Concealed (RYT-24)
• Quantum Ultra Multi-Zone

Steps

Follow these steps to activate Fan-Only mode: 

1. Press the "MODE" button until the fan symbol appears on the remote controller's display. 
2. Use the "FAN" button to set the desired fan speed. The system will cycle from Auto > Mute > Low > Low-Mid > Mid > Mid-High > High > Turbo.